How To Feed With The Bypass Mode - Canon imageFORMULA DR-2050C User Manual

How to Feed with the Bypass Mode

1.
Raise the feed selection lever (Bypass mode).
2.
Adjust the document guide to the width of the document being scanned.
3.
Start scanning from the application.
4.
Set the document in the scanner with the back of the document facing forward
and its top edge facing downwards.
The document is scanned as it is detected.
IMPORTANT
• When scanning documents that are fastened together, such as invoices, set
the edge that is fastened together as the leading edge.
• After you finish scanning, close the document feed tray and the upper cover
to prevent damage to the scanner while it is not being used.
26
Using the Scanner
Bypass mode
Page Separation
mode