Documents - Canon imageFORMULA DR-2050C User Manual

1. Documents

This scanner can scan documents ranging in size from business cards and
checks to LTR/A4 size documents. The size of documents that can be scanned
is shown below.
For Page Separation mode (continuous feed) (See "How to Feed with the
Page Separation Mode," on p. 23.)
Width: 2.16" to 8.5" (55 mm to 216 mm)
Length: 2.75" to 11.6" (70 mm to 297 mm)
Weight: 14 to 32 lb bond (52 to 128 g/m
0.0024" to 0.0059" (0.06 mm to 0.15 mm)
For Bypass mode (single-sheet feed) (See "How to Feed with the Bypass
Mode," on p. 26.)
Width: 2.16" to 8.5" (55 mm to 216 mm)
Length: 2.75" to 13.9" (70 mm to 355 mm)
Weight: 11 to 40 lb bond (42 to 157 g/m
0.0020" to 0.0079" (0.05 mm to 0.20 mm)
IMPORTANT
A document must meet the following criteria to be scannable:
• When scanning a multipage document, pages must be grouped together so
that they have the same size, thickness, and weight. Scanning different types
of paper at one time can cause the scanner to jam.
• Always make sure that the ink on a document is dry before scanning it.
Scanning documents with the ink still wet may soil the rollers or scanning
glass, cause lines or smudges to appear on images, or dirty other documents.
• Always clean the rollers or scanning glass after scanning a document written
in pencil. Scanning documents with pencil written on them may soil the
rollers or scanning glass, cause stripes to appear in images, or dirty other

documents.

• When scanning a two-sided document that is printed on thin paper, the image
on the opposite side of each page may show through. Adjust the brightness
in the scanning conditions before scanning the document.
• Scanning the following types of documents can cause a paper jam or
malfunction. To scan such a document, make a photocopy of the document
and then scan the photocopy.
Wrinkled or
creased documents
Curled paper
Torn documents
20
Using the Scanner
2
)
2
)
Extremely thin,
translucent paper
Carbon paper
Coated paper
Paper with square
holes
Documents with
paper clips or staples