Turning The Machine On And Off - Canon PIXMA MP810 Quick Start Manual

Turning the Machine On and Off

Turn on the machine before printing.
Turning on the Machine
Before turning on the machine, confirm the following.
The Print Head and ink tanks are set into place.
If you are using the machine connected to a computer, confirm also the following.
The machine is connected to your computer (or a compatible device).
The MP Drivers are installed.
Note
If preparatory operations above are not complete, follow the Easy Setup Instructions to complete
them.
1
Open the Operation Panel and press the ON/
OFF button to turn on the machine.
The POWER lamp flashes green, and changes to
steady, non-flashing light.
Important
If the ALARM lamp lights up or flashes orange and an
error message is displayed on the LCD, see "Error
Message Is Displayed on the LCD" on page 71.
2
If you are using the machine connected to a
computer, turn on your computer.
Turning off the Machine
1
To turn off the machine, press the ON/OFF
button.
When the POWER lamp stops flashing, the
machine is turned off.
Important
About the Power Plug
When removing the power plug after turing off the
machine, be sure to confirm that the POWER lamp is
not lit. If the power plug is removed from the wall outlet
with the POWER lamp still lit or flashing green, the
machine may become unable to print.
See "Keeping the Best Printing Results" on page 53.
4 Before Printing