Canon PIXMA MP810 Quick Start Manual page 42

4
Remove the FAU Protective Sheet from the Document Cover and then remove
either the film guide for film strips or for slides, according to the type of your
original, from the rear of the FAU Protective Sheet.
Mounting a 35 mm Film Strip:
(1) On the film guide, open the film holder.
Gently squeeze in the edges of the film holder
to release it.
(2) Mount the film in the film guide with the front
side (the side showing the correct image) face
down, with the frame order running from left to
right and with the tip of the film set under the
tabs of the film guide. Position the film in the
film guide so that the white line marks of the
guide do not obscure the film frames.
(3) Squeeze the film holder inward lightly and
close it completely.
(4) With the mark
load the film guide with its sides aligned to the
right and left grooves of the Platen Glass.
(5) Confirm that the front side of the film (the side
showing the correct image) faces down.
38 Photo Printing from Photo or Film
on the film guide facing up,
(3)
(2)