iRobot Roomba i1 Owner's Manual page 11

Cleaning the Full Bin Sensors
1 Remove and empty the bin.
EN
2
Wipe the inner sensors with a
clean, dry cloth
Wipe the bin door with a clean, dry cloth.
3
Closed Door
Opened Door
6 For more information, visit global.irobot.com
Washing the Bin
Important:
Do not wash the filter.
Remove the filter before washing the bin.
Release the bin, remove the filter,
1
and open the bin door.
2
Rinse the bin using warm water.
Note:
Bin is not dishwasher safe.
Make sure bin is completely dry. Reinsert
3
filter and place bin back in the robot.
Cleaning the Edge-Sweeping Brush
Use a small screwdriver to loosen the
1
screw holding the Edge-Sweeping
Brush in place.
Pull to remove the Edge-Sweeping
2
Brush. Remove any hair or debris,
then reinstall the brush.