Changing The Iso Speed - Canon PowerShot SX230 HS User Manual

• B stands for blue and A for amber.
• You can also manually correct the white balance by recording custom
white balance data (p. 84) and then following the steps on p. 84.
• Even if you change the white balance setting in Step 2 after making
adjustments in the correction level, those adjustments will be retained.
However, the adjustments will be reset if custom white balance data is
recorded.

Changing the ISO Speed

Automatically adjusts the ISO speed to the Shooting mode and shooting
conditions.
For shooting outdoors, in fine weather conditions.
Low
For shooting in cloudy, or twilight conditions.
High
For shooting nightscapes, or in dark interiors.
Changing the ISO speed
• Lowering the ISO speed results in sharper images, but there may be an
increased chance of image blurring in certain shooting conditions.
• Raising the ISO speed results in a faster shutter speed, reducing image blurring
and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.
When the camera is set to
display the automatically set ISO speed.
Choose the ISO speed.
After pressing the m button, press the
op buttons or turn the  dial to choose
, then press the m button again.
Choose an option.
Press the op buttons or turn the  dial
to choose an option, then press the m
button.
The setting will appear on the screen.
, you can press the shutter button halfway to
Changing the ISO Speed
85