Indicator - Canon PowerShot SX230 HS User Manual

Histogram during Playback
Dark
Bright
GPS Information Display
• When a signal is not correctly received from a GPS satellite, [---] will
appear in place of numerical values for items where positioning data is
incomplete.
• UTC stands for "Coordinated Universal Time", and is approximately
equivalent to Greenwich Mean Time.

Indicator

The indicator on the back of the camera (p. 43) will light or blink depending
on the camera's status.
Colors Status
Lights
Blinks
Green
When the indicator blinks green, do not turn off the power, open the memory
card slot/battery cover, shake or jolt the camera. These actions may corrupt
the image data or cause the camera or memory card to malfunction.
The graph that appears in Detailed
High
Information Display (p. 186) is called the
histogram. The histogram shows the
distribution of brightness in an image
Low
horizontally, and the amount of brightness
vertically. When the graph approaches the
right side, the image is bright, but when it
approaches the left side, the image is dark,
and in this way you can judge the exposure.
SX230 HS
If you press the o button in Detailed
Information Display, you can check the
location information (latitude, longitude,
elevation) and shooting date recorded to
still images and movies (p. 104) when
[GPS] is set to [On].
The displayed contents, from top to bottom,
are latitude, longitude, elevation and UTC.
When connected to a computer (p. 35), display off (p. 169)
During camera start-up, recording/reading/transmitting image
data, when shooting long exposures (pp. 108, 110), or while
the logger function is operating (p. 104)
Operation Status
Indicator
SX230 HS
.
45