Using the Self-Timer to Prevent Camera Shake
The camera will shoot approximately 2 seconds after the shutter button is
pressed, preventing any camera shake that occurs when pressing the shutter
button.
Customizing the Self-Timer
You can set the delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
What if the number of shots is set to two or more shots?
•
Exposure and white balance settings are set with the first shot.
•
If the flash fires or you set a high number of shots, the shooting interval may take
longer than usual.
•
If the memory card fills, shooting stops automatically.
When you set the delay for more than 2 seconds, the lamp and self-timer
sound speed up 2 seconds before the shutter releases (the lamp remains
lit when the flash will fire).
Choose Î.
Follow Step 2 on p. 58 to choose Î.
Once set, Î will appear on the screen.
Follow Step 3 on p. 58 to shoot.
Choose $.
Follow Step 2 on p. 58 to choose $, then
press the n button immediately.
Choose the settings.
Press the op buttons to choose [Delay]
or [Shots].
Press the qr buttons or turn the  dial to
choose a value, then press the m button.
Once set, $ will appear on the screen.
Follow Step 3 on p. 58 to shoot.
Using the Self-Timer
59