Charge The Battery; Remove The Battery; Inserting The Battery - Canon PowerShot A810 User Manual

CB-2LD
CB-2LDE
• To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery, see "Specifications" in the Getting Started
guide.
A4000 IS A3400 IS

Inserting the Battery

Insert the included battery.

Charge the battery.

For CB-2LD: Flip out the plug (
the charger into a power outlet (
For CB-2LDE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
The charging lamp turns orange and
charging begins.
When the charging is finished, the lamp turns
green.

Remove the battery.

After unplugging the battery charger, remove
the battery by pushing it in (
A2400 IS A2300
Open the cover.
Slide the cover (
Initial Preparations
) and plug
).
) and up (
) and open it ( ).
).
17