Resetting The Lamp Counter; About The Display Of The Lamp Counter - Canon REALiS WUX10 Mark II User Manual

Resetting the Lamp Counter

[Other settings] - [Lamp counter]
HDMI
DIGITAL PC
ANALOG PC
Other settings
Lamp counter
You can reset the lamp counter that indi-
cates the timing to replace the projector
when you replace it.
Do not reset the lamp counter except
when you have replaced the lamp. Oth-
erwise, the lamp counter cannot indi-
cate the correct timing for replacing the
lamp. For the details of the lamp
replacement, refer to the page 126.
Press the OK button after selecting [Lamp
counter], and the lamp counter is dis-
played.
Select the [Reset] and press the OK but-
ton.
Select [OK] on the screen for confirmation,
COMPONENT
press the OK button, and the lamp counter
VIDEO
is reset.
System settings
Press the MENU button.

■ About the Display of the Lamp Counter

The lamp counter displays the hours of
use of the lamp in the following way:
Less than 1,800 hours
Displayed in green bar.
1,800 – less than 2,000 hours
Displayed in green and yellow bar.
For 1,800 - 1,900 hours, a message
"Obtain a new lamp." appears when power
is turned on.
101
Setting Various Function