Reassigning Keys - Canon Microfilm Scanner 500 Instruction Manual

■ Reassigning keys

The MS500 lets you reassign or disable the operation of the DATE,
NOTE, PICTURE, and SHARPNESS keys on the keyboard.
To change the key function, proceed as follows.
1. Hold down the key that you want to reassign for about 5 seconds,
until the key's lamp and the Print display begin blinking.
2. Set the desired function for that key by entering the appropriate
code value. (Refer to the list below.) Use the plus and minus keys
to enter the code. The entered value appears in the Print display.
Display Function
Key is disabled.
Operates as DATE key.
Operates as NOTE key.
Operates as PICTURE key.
Operates as SHARPNESS key.
3. Press the Reset key to register the new setting.
Repeat the above procedure as necessary to reassign each of the
keys you want to change.
This feature is available only for the keyboard's DATE,
NOTE, PICTURE, and SHARPNESS keys.
4. When you are ready to return to normal operating mode, press the
Reset key once again.
33
SPECIAL FEATURES