Canon imageFORMULA P-215 User Manual page 62

When you want to set the scanner conditions
automatically
Set [Full Automatic Mode] in [User Preference] to scan with scanning
conditions that match the document.
Hint
When [Full Automatic Mode] is selected, [Color mode], [Page Size],
and [Dots per inch] are all detected automatically. In addition, the
[Scanning Side] setting becomes [Skip blank page] and [Document
Orientation] becomes [Text orientation recognition].
When you want to use multistream settings for scanning
Multistream settings allow you to output multiple different scanned
images with a single scan operation, and output scanned images with
different scanning conditions for each of the front and back pages.
IMPORTANT
• The multistream settings can only be used in Windows.
• Depending on the application program, these settings may not
appear.
When you want to use the multistream settings for scanning, select
the [Use MultiStream] checkbox on the [Others] tab to display the
setting items related to multistream, and then configure the setting
items in the following order.
When you want to specify different scanning conditions for the front
and back pages of a document, select [Skip blank page] or [Duplex]
for [Scanning Side] on the [Basic] tab in advance.
Specify the number of scanning conditions to apply in [Stream
count of Front]. Up to three can be specified.
Select [Front 1st], and then open the other tabs and set the
scanning conditions. Depending on the value specified for [Stream
count of Front], configure the remaining [Front 2nd] and [Front 3rd]
in the same way.
When specifying the scanning conditions of the back, configure the
settings in the same way as described in
specify [Stream count of Back], and then set the scanning
conditions for each of [Back 1st] to [Back 3rd].
62
to . In this case,