Precautions For Installing The Printer - Citizen CT-S801 II User Manual

3.7 Precautions for Installing the Printer

The printer can be used horizontally, vertically, or installed on a wall. However,
the CT-S801IIS (built-in power supply type) cannot be used vertically or installed
on a wall.
Use the optional stand for vertical applications, and the optional brackets for
wall installations. Please refer to the manual for further details.
Horizontal position
You can change the memory switch settings to invert the LCD if the printer is
used in a vertical position or installed on a wall.
Refer to 2.1 Printer Appearance (LCD in the vertical or wall mounted
position)
Change the paper near-end sensor settings for vertical and wall installations.
(The factory setting for the paper near-end sensor is for horizontal installations.)
CAUTION
Do not use the printer under the following conditions.
 Locations subject to vibration or instability.
 Locations that are very dirty or dusty.
 Locations where the printer is not level.
• The printer may fall and cause an inju ry.
• The quality of printin g may deterior ate.
 Oriented other than as specified.
• The printer may malfunction , be damag ed, or cause an electric shock.
Precautio ns for horizontal installatio ns
 Do not set cutting to full cut. Doing so may cause cutter jams.
Precautio ns for vertical/w all installa tions
 Adjust the paper near-end sensor.
Precautio ns for vertical installatio ns
 The optional stand may fall over when you pull on partially cut thick paper. Do not use thick paper.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Wall installation
Refer to 5.3 Manual Setting of Memory Switches
Refer to 3.10 Adjusting the Paper Near-end Sensor
— 34 —
V10 CONSUMIBLES S.L.
Vertical position