Notes On Handling The Usb Interface (For Windows Users) - Canon S630 Quick Start Manual

Notes on Handling the USB Interface (for Windows Users)

If installation of the printer driver does not proceed as instructed in this Quick Start Guide,
there may be a problem with the USB driver installation.
Try reinstalling the printer driver.
Reinstalling
If the installation still does not proceed as instructed, check the status of the USB driver
following the procedures described below.
Checking the USB Driver Status
If displayed with an exclamation
mark ( ! )
If Other Devices is displayed
If you cannot proceed beyond the Printer Port screen:
1
Click Cancel.
2
When the Abort Installation screen is
displayed, click Abort.
3
When the Terminate Installation screen
is displayed, click OK.
4
Turn the printer off.
5
Reinstall the printer driver (see page 8).
1
Ensure the computer and printer are
connected using the USB cable and that
the printer is turned on.
2
Select Start, Settings and Control Panel.
3
Double-click System.
If the System icon is not displayed for
Windows Me users, click on view all Control
Panel options on the left-hand side of the screen.
4
Click the Device Manager tab.
For Windows 2000, click the Hardware tab then
click Device Manager.
5
Double-click Universal Serial Bus
controllers.
6
Check that Canon S600/Canon S630 is
displayed.
• If displayed, installation is complete.
• If displayed with an exclamation mark (!),
installation was not successful. Delete and
reinstall.
• If nothing is displayed or Other Devices is
displayed instead, installation was not
successful. Delete and reinstall.
Refer to the User's Guide for details on how to
delete unknown devices.
21