Kyocera ECOSYS P2335dn Operation Manual page 115

Troubleshooting > Troubleshooting
Symptom
Part of the image is
periodically faint or shows
white lines.
The previous image remains
and lightly printed.
Checkpoints
—
—
—
—
—
Corrective Actions
Open and then close the front cover.
Select [Adjust print quality] in the
Maintenance menu, and select
[Refresh] in [Drum refresh].
Select [Adjust print quality] in the
Maintenance menu and set a lower value for
"Drum charge setting". Decrease the
adjustment value 1 level at a time from the
current value. If there is no improvement after
the value is decreased by 1 level, decrease by
1 level again. If there is still no improvement,
return the setting to the original value.
Make sure the paper type setting is
correct for the paper being used.
Select [Adjust print quality] in the
Maintenance menu and set a higher value for
"Drum charge setting". Increase the
adjustment value 1 level at a time from the
current value. If there is no improvement after
the value is increased by 1 level, increase by
1 level again. If there is still no improvement,
return the setting to the original value.
6-15
Reference
Page
—
page 6-10
page 6-10
page 4-17
page 6-10