Turn On The Machine; Specify Initial Settings - Canon imageCLASS D1320 Starter Manual

Turning On the Machine and Specifying the
Initial Settings
1.

Turn ON the machine.

• When turning ON the machine for the first time after installation. it
may output a piece of blank paper. This is not a failure.
• The machine enters the Sleep mode to conserver energy when you
do not operate the machine for a certain period of time. To cancel the
Sleep mode, press the [
2.

Specify initial settings.

Press [ ] or [ ] to
select, and press [OK].
Language
English
French
Spanish
Portuguese
Read the messages and press [OK].
Open frnt cover; see
if orange packing
material is removed.
Next
Press [ ] or [ ] to select,
and press [OK].
Time Zone Settings
GMT-5:00
GMT-4:00
GMT-3:30
GMT-3:00
12
] (Energy Saver) key on the operation panel.
Press [
select, and press [OK].
Select Country/Region
United States (US)
Canada (CA)
Brazil (BR)
Mexico (MX)
Check that tabs/tape
are removed from
toner cartridge.
Enter the date and time and
press [OK].
Current Time Settings
01/01/2011
•
Move the cursor with [
•
Press [
switch to <AM> or <PM>.
] or [ ] to
Next
12:52 AM
] or [ ].
] or [ ] to select the number or
Check that paper is
loaded in Drawer 1.
Next
The initial screen appears when
the initial setup is complete.
Copy: Press Start
100% LTR
1
+ -
Density: 0
Original Type: Text
2-Sided: Off
1
...