6
Tilt the Print Head forward and set it in place as shown.
•
Do not knock the Print Head against the sides of the holder.
•
Install in a well-lit environment.
Incline el cabezal de impresión hacia adelante y sitúelo como se muestra.
•
No golpee el cabezal de impresión contra los laterales del soporte.
•
Instálelo en un ambiente bien iluminado.
7
Hold the Print Head Lock Lever firmly and lower it
completely.
•
Once you have installed the Print Head, do not remove it
unnecessarily.
Sujete firmemente la palanca de bloqueo del cabezal
de impresión y bájela por completo.
•
Una vez instalado el cabezal de impresión, no lo retire
si no es necesario.