Yamaha YZF-R1 Owner's Manual page 42

Instrument and control functions
ing slick tires.
1

T-2 is preset for track use with
street tires.

2 R-1 is preset for road use with
street tires.
3
YRC Setting
km/h
M-1 8 18
4
M-2
M-3
5
SETTING Fr COM Fr REB
6
1 2 3
7
1. ERS mode selection box "SETTING"
2. Front compression damping force
8
3. Front rebound damping force
4. Rear compression damping force
5. Rear rebound damping force
9
6. Factory preset level
7. Current level setting
10
For the manual setting modes M-1,
M-2, and M-3, the following settings
11
can be adjusted:
Fr COM: front compression damping
12
Fr REB: front rebound damping
Rr COM: rear compression damping
Rr REB: rear rebound damping
TIP

M-1 is preset for track use with rac-
ing slick tires.

M-2 is preset for track use with
street tires.

M-3 is preset for street use with
12 : 00
7
street tires.
22 22
6
To adjust the ERS mode settings
Rr COM Rr REB
4 5
1. To ERS menu
1. Select the "
right of ERS.
TIP
The ERS setting menu is divided into
automatic and manual setting modes,
and the two types are accessed sepa-
YRC Setting 12 : 00
km/h
A 1 1 1 1 1 1 1 1 1 T - 1
ON
B 2 2 2 2 2 2 T - 2
C 3 3 3 3 R - 1
D 4 4 M - 1
5 M - 2
OFF OFF OFF OFF OFF
YRC PWR TCS SCS LCS QS QS LIF ERS
" mark located to the
4-20
rately. Before moving to the ERS set-
ting menu, make sure the current ERS
mode corresponds to the same type
(automatic or manual) that you'd like to
adjust.
2. The display will change to the rele-
vant suspension setting screen
and the ERS mode selection box
"SETTING" is highlighted. Short
push the wheel switch to enter the
box and select the ERS mode that
you want to adjust.
3. Select the suspension item that
you want to adjust, and then rotate
the wheel switch to adjust the set-
ting level.
TIP
All ERS modes regardless of type are
independent and should be set sepa-
1
rately.
4. To adjust other ERS modes of the
same type, repeat from step 1. To
switch types or when finished, se-
lect the " " mark to return to the
main "YRC Setting" menu.