Yamaha YZF-R1 Owner's Manual page 34

Instrument and control functions
1
QS LIF
LCS QS LIF MODE -
2
1000 r/min
×
12 34
3
01
LAP
123 123456
123 ODO
km/h km/h
4
MODE - A 1 2
PWR TCS
To turn off the traction control system
5
select TCS with the center button, then
push and hold the up button until TCS
6
OFF is displayed. To turn TCS back on,
select TCS OFF and then press the
down button (TCS will return to its pre-
7
vious setting).
8 TIP
Turning off the traction control system
will turn off the SCS, LCS, and LIF sys-
9
tems for all YRC modes.
10
YRC items LCS/QS/LIF
The on/off status of YRC items LCS,
11
QSS, and LIF is shown here. When any
of these systems are registered (not set
12
to OFF) for the currently selected YRC
mode, its respective icon will appear.
When LCS is registered for the current-
ly selected YRC mode, its icon will be
grey. To activate the launch control
12 : 00
A GPS MODE - A
system, press and hold the center but-
ton until the LCS icon stops flashing
and turns white.
GEAR
LATEST
12
N
TIP
km
LCS, QSS, and LIF system setting lev-
3
SCS T -1
els can only be adjusted from the
MENU screen.
ERS indicator "
This icon shows the current ERS mode.
(See "YRC Setting" on page 4-16 and
"ERS" on page 4-19 to change the reg-
istered ERS mode or adjust ERS set-
ting
disappears from the ERS indicator (the
icon turns blank), stop the vehicle and
wait a few seconds until the mode reap-
pears.
TIP

The suspension will remain fixed
at its most recent settings until
self-reset has completed.

If the ERS indicator does not re-
turn to normal, have a Yamaha
" (YZF-R1M)
levels.) If the ERS
4-12
dealer inspect the vehicle.
GPS indicator "
GPS
(CCU-equipped models)
This icon comes on when a GPS unit is
synched with your vehicle.
Logging indicator "
(CCU-equipped models)
This icon comes on when vehicle data
is being recorded via the logging func-
tion.
Clock
The clock uses a 12-hour time system.
Lap timer
mode
This stopwatch function measures and
records up to forty laps. On the main
screen, the lap timer shows the current
lap time and lap number (indicated by
the LAP mark). Use the Pass/LAP
switch to mark lap times. When a lap is
completed, the lap timer will show the
latest lap time (marked by the LATEST
indicator) for five seconds.
"
"