Canon Optura Instruction Manual page 28

Turning off the remote sensor
E
The remote sensor can be turned off to
prevent interference from other Canon
wireless controllers being used nearby.
1. Open either the camera or the VCR menu, and point the arrow
at SENSOR.
2. Select the OFF setting and close the menu.
• S | appears in the display.
Turning off the tally lamp
The tally lamp lets you know that the
camera is recording. However, its
flashing may be reflected into the lens
during close-up recording, or when
recording through glass.
You may therefore decide to turn it off.
1. Open either the camera menu or the VCR menu, and point the
arrow at TALLY LAMP.
2. Select the OFF setting and close the menu.
• The tally lamp no longer flashes during recording, but it will still light up
when the camera receives a signal from the wireless controller.
28
SENSOR••••••OFF
(see p. 25)
TALLY LAMP••OFF
(see p. 25)