Cassette Memory - Canon Optura Instruction Manual

Protecting tapes from accidental erasure
To protect your recording from accidental erasure, slide the tab on the cassette so
that it exposes the hole and the red mark. (This switch position is usually labeled
SAVE or ERASE OFF).
If you load this cassette and put the camera in record pause mode (p. 12), "THE
TAPE IS SET FOR ERASURE PREVENTION" is displayed for approx. 4
seconds and then the v mark flashes in the display. The camera also shows the
above phrase if you accidentally press the 2 (record) button with the camera
switched to VCR mode.
If you want to record on the cassette again, slide the tab back so the hole is closed,
and the red mark covered.

Cassette Memory

You are unable to use the cassette memory function with this camcorder.
REC
SAVE
REC
SAVE
E
11