Canon VIXIA HV40 Instruction Manual page 45

The DV output cannot be changed
while a DV cable is connected to the
HDV/DV terminal.
NOTES
About the [HDMI OUT] display
[HDMI OUT] appears at the bottom of the
[ PLAY/OUT SETUP2] menu screen in
mode ([ PLAY/OUT SETUP]
menu in other modes). This is not a selectable
menu option, but rather an information item that
displays the specification of the video output
when the camcorder is connected to an
external device using the HDMI cable. For
further details about the HDMI connection, refer
to 74.
DISPLAY SETUP
BRIGHTNESS
Adjust ( ) the brightness of the LCD
display with the joystick.
Changing the brightness of the LCD
display does not affect that of the
viewfinder or the recordings.
MARKERS
[ OFF], [ LEVEL(WHT)],
[ LEVEL(GRY)], [
[ GRID(GRY)]
You can display a grid or a horizontal line
at the center of the screen. The markers
are available in white or gray. Use the
markers as a reference to make sure your
subject is framed correctly (vertically and/
or horizontally).
Using the markers will not affect the
recordings on the tape or memory card.
the CUSTOM key (
ASST.FUNC.
Mode switch:
[
[
You can use the assist functions to make
sure you adjust the focus and exposure
correctly.
[ZEBRA]: A striped pattern (zebra
pattern) will appear over areas of the
picture that are overexposed (too bright).
[
than [
[
objects in the picture will be emphasized
in order to allow you to focus manually
more easily.
the recordings on the tape or memory card.
the CUSTOM key (
AUDIO LEVEL
[
TV SCREEN
GRID(WHT)],
[
When set to [
on-screen displays will appear also on the
screen of a connected TV or monitor.
controller.
Menu Options Lists
This function can also be activated with
OFF], [ ZEBRA(70%)],
ZEBRA(100%)], [
ZEBRA(70%)] is more sensitive
ZEBRA(100%)].
PEAKING]: The silhouettes of
Using the assist functions will not affect
This function can also be activated with
ON], [ OFF]
ON]*, [ OFF]
ON], the camcorder's
You can also use
DISP.
45
61).
PEAKING]
61).
( 65)
on the wireless