Canon VIXIA HV40 Instruction Manual page 43

TV TYPE
[ NORMAL TV], [
In order to display the picture in full and in
the correct aspect ratio, select the setting
according to the type of television to
which you will connect the camcorder.
[ NORMAL TV]: TV sets with 4:3
aspect ratio.
[ WIDE TV]: TV sets with 16:9
aspect ratio.
This setting will be unavailable while
the camcorder is connected to an
external device using the HDMI cable.
OUTPUT CH
[ L/R], [ L/L], [
You can select the audio channel to use
during the playback of a tape with audio
recorded on two channels.
[ L/R]: Left and Right channels
(stereo) / Main + Sub tracks (bilingual).
[ L/L]: Left channel only (stereo) / Main
track only (bilingual).
[ R/R]: Right channel only (stereo) /
Sub track only (bilingual).
AUDIO OUT
[ STEREO1], [
[ MIX/FIXED], [
You can select the audio track to use
during the playback of a tape with audio
dubbed over the recording.
[ STEREO1]: Original sound only.
[ STEREO2]: Dubbed audio only.
WIDE TV]
R/R]
STEREO2],
MIX/VAR.]
Menu Options Lists
[ MIX/FIXED]: Mixed audio with the
original sound and dubbed audio at the
same level.
[ MIX/VAR.]: Mixed audio where the
balance between the original sound (
and the dubbed audio (
adjusted.
MIX BALANCE
When [AUDIO OUT] is set to [
VAR.], adjust ( ) the sound balance
with the joystick.
The camcorder will retain the audio
balance adjustment; however if you turn
off the camcorder, [AUDIO OUT] will be
reset to [ STEREO1].
AV/PHONES
[ AV], [ PHONES]
PHONES VOL.
When [AV/PHONES] is set to
[ PHONES], adjust (
of the headphones with the joystick.
* In mode, adjust the volume
using the joystick guide (
COMP.OUT
[ 480i], [ 1080i/480i]
You can select the video specifications to
use when connecting the camcorder to a
high-definition TV using the video
component connection.
43
) can be
MIX/
( 32)
*
) the volume
33).
)