Checking And Lubricating The Centerstand And Sidestand; Checking The Front Fork - Yamaha Xmax 250 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Checking and lubricating the
centerstand and sidestand
The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-
to-metal contact surfaces should be
lubricated if necessary.
6
EAU23211
s WARNING
s
If the centerstand or sidestand
does not move up and down smo-
othly, have a Yamaha dealer check
or repair it.
Recommended lubricant:
Lithium-soap-based grease (all-
purpose grease)
6-21
EWA10740

Checking the front fork

The condition and operation of the
front fork must be checked as follows
at the intervals specified in the perio-
dic maintenance and lubrication
chart.
To check the condition
s WARNING
s
Securely support the motorcycle so
that there is no danger of it falling
over.
Check the inner tubes for scratches,
damage and excessive oil leakage.
To check the operation
1. Place the motorcycle on a level
surface and hold it in an upright
position.
EAU23271
EWA10750