Yamaha Xmax 250 Owner's Manual page 21

Pushing the "SET" button when in the
tripmeter mode switches the display
between the different tripmeter func-
tions in the following order:
Distance Time Average speed
Distance
If the fuel level warning light comes on
(See page 3-3.), the display will auto-
matically change to the fuel reserve
tripmeter mode "Trip/fuel" and start
counting the distance traveled from
that point. In that case, pushing the
"SET" button switches the display
between the various tripmeter and
odometer modes in the following
order:
Trip/Fuel Trip 1 Trip 2
Trip/fuel
INSTRUMENT AND CONTROL FUNCTIONS
To reset a tripmeter, select it by pus-
hing the "MODE" button, and then
push the "SET" button for at least one
second. If you do not reset the fuel
reserve tripmeter manually, it will
reset itself automatically and the dis-
play will return to the prior mode after
refueling and traveling 5 km.
Clock mode
To set the clock:
1. When the display is in the "Total"
mode, push the "SET" button for
at least two seconds.
2. When the hour digits start flas-
hing, push the "SET" button to
set the hours.
Total
3-7
3. Push the "MODE" button, and
the minute digits will start flas-
hing.
4. Push the "SET" button to set the
minutes.
5. Push the "MODE" button and
then release it to start the clock.
The display will return to the
"Total" mode.
3