Markings On Tool; Package Contents - DeWalt XR LI-ION DCS391NT Original Instructions Manual

EngLIsh
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other than
e
the designated D WALT batteries with a D
e
charger may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCS391 operates on an 18V XR Li-Ion battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
more information.

Package Contents

The package contains:
1 Cordless circular saw
1 24-tooth blade
1 Hex key
1 Rip Guide
1 Plastic bag (QW, XJ, GB):
1 Dust extraction port
1 M4 X 18 Cap screw
2 Li-Ion battery packs (L2, M2 models)
1 Kitbox (L2, M2 models)
1 Charger (L2, M2 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
36
• Take the time to thoroughly read and understand this manual
prior to operation.

Markings on Tool

The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. B)
The date code 23
WALT
e
is printed on the battery port.
Example:
Description (Fig. A, D, F)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger switch lock-off button
1
Trigger switch
2
Battery pack
3
Depth adjustment lever
4
Shoe
5
Lower blade guard retracting lever
6
Lower blade guard
7
Blade clamping screw
8
9 Kerf indicator
Bevel adjustment knob
10
Blade lock button
11
12 Auxiliary handle
Battery release button
13
Hex key
14
15 Rip guide knob
Rip guide
16
Intended Use
Your DCS391 cordless circular saw has been designed for
professional wood sawing applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These heavy-duty circular saws are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
, which also includes the year of manufacture,
2019 XX XX
Year of Manufacture