Removing The Computer Cover - HP Compaq dx6100 ST Hardware Reference Manual

Removing the Computer Cover

Ä
Hardware Reference Guide
To remove the computer cover:
1. If you have locked the Smart Cover Lock, restart the computer
and enter Computer Setup to unlock the lock.
2. Turn off the computer properly through the operating system,
then turn off any external devices.
3. Disconnect the power cord from the power outlet and the
computer, and disconnect any external devices.
4. Remove the computer from the stand and lay the computer on its
side.
CAUTION: Before removing the computer cover, ensure that the
computer is turned off and that the power cord is disconnected from
the electrical outlet.
5. Press the buttons on the left and right sides of the computer 1
then slide the computer cover forward until it stops 2 and lift it
up and off the chassis.
Removing the Computer Cover
www.hp.com
Hardware Upgrades
2-5