Removing The Computer Cover - HP Blade dc72 Hardware Reference Manual

Removing the Computer Cover

1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as diskettes or compact discs, from the computer.
3. Turn off the computer properly through the operating system, then turn off any external devices.
4. Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION
board as long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the computer.
5. If the computer is on a stand, remove the computer from the stand.
6. Press the buttons on the left and right sides of the computer (1) then slide the computer cover
forward until it stops (2) and lift it up and off the chassis.
Figure 2-3
CAUTION
between the DIMM sockets. If the LED is illuminated, the system still has power. Turn off
the computer and remove the power cord before proceeding.
ENWW
Regardless of the power-on state, voltage is always present on the system
Removing the Computer Cover
After removing the computer cover, look for the LED on the system board
Removing the Computer Cover 13