Table of Contents
Advertisement
6. Service
a. Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Safety Rules for Cordless Scissors (Shears)
a. Keep hands away from moving cutting
blades. Contact with blade may cause
personal injury.
b. Keep hands away from cutting area;
never reach underneath the material for
any reason while cutting. Contact with
blade may cause personal injury.
c. Ensure that no material or surface under
the cutting area can be damaged by the
cutting blades.
d. Hold tool by insulated gripping surface
when performing an operation where
the cutting blades may contact hidden
wiring. Contact with a "live" wire will
make exposed metal parts of the tool
"live" and shock the operator.
e. In case of electrical or mechanical
malfunction, immediately switch off the
tool or unplug charger from power
source.
sawing, grinding, drilling, and other
construction activities contains chemicals
known to cause cancer, birth defects or
other reproductive harm.
examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Important Safety Warnings
Additional Safety Warnings
Some dust created
by power sanding,
Some
SAVE THESE INSTRUCTIONS
b. Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or
authorized service providers.
f.
Battery tools are always in an operative
condition. Be aware of the possible
hazards.
g. Do not run the tool while carrying it at
your side. Blades could become
entangled with clothing and injury may
result.
h. Do not cut material greater than the
rated capacity of the scissors. Cutting
material greater than the capacity of the
scissors may cause damage to the blades.
i.
During a cut, don't remove scissors from
work
while
Removing the scissors while running may
cause damage to the blades.
j.
Do not use dull or damaged blades or
accessories not intended for these
scissors. Replace worn blades. Sharp
blades minimize stalling.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and
work
equipment, such as those dust masks that
are specially designed to filter out
microscopic particles.
-4-
blades
are
with
approved
moving.
safety
Advertisement
Table of Contents
