Each Setting And Adjustment - Pioneer MVH-290BT Service Manual

5
3. Fit the spring in the groove at the position shown in the figure.
4. Fit the boss on the lower side of the lock in the lower hole of
the cabinet, and then warp the rib on the cabinet in the direction
shown in the figure and fit the boss of the lock in the cabinet.

8. EACH SETTING AND ADJUSTMENT

There is not information to be shown in this chapter.
5
6
MVH-290BT/XEUC
6
7
7
8
A
B
Fig.8
C
D
E
F
13
8