Related Manuals for Pioneer MVH-300EX
Summary of Contents for Pioneer MVH-300EX
- Page 1 MVH-300EX MVH-200EX RDS AV RECEIVER RADIO AV RDS RECEPTOR RDS AV Installation Manual...
-
Page 2: Important Safeguards
Pioneer receiver unless it is connected risk of electric shock or other hazards, and on or after May 1, 2018 have rear visibility... -
Page 3: Notice For The Blue/White Lead
(Maximum input power) and between 4 Rear panel Power cord Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit. • When rear speaker output is used by 2 Ω of subwoofer, use speakers over 70 W (Maximum input power). -
Page 4: Speaker Leads
connected to the power supply side of Gray/black iPod/iPhone and the parking brake switch. Green Power supply side Green/black smartphone Parking brake switch Violet Ground side Violet/black NOTE Subwoofer (4 Ω) For details on how to connect an external When using a subwoofer of 2 Ω, be sure Speaker leads device using a separately sold cable, refer to connect the subwoofer to the violet... -
Page 5: Iphone With 30-Pin Connector
USB Type-C cable (Type USB A - USB C) iPhone with 30-pin External video (supplied with CD-CU50 (sold connector separately)) component and the Smartphone display NOTE The length of Type USB A - micro USB B Connecting via the USB port cable cannot exceed 2 m (6 ft. -
Page 6: Precautions Before Installation
External video component (sold Installation separately) NOTE The appropriate setting is required to use the external video component. For details, Precautions before Before installing refer to the Operation Manual. installation WARNING • Consult with your nearest dealer if NEVER install the rear display in a installation requires drilling holes or location that enables the driver to watch other modifications of the vehicle. -
Page 7: Installation Using The Screw Holes On The Side Of This Product
For installation, contact your dealer or an Be sure to use the screws supplied authorized Pioneer Service Station for with this product. assistance. Fastening this product to the factory radio-mounting bracket.