Panasonic INVERTER NN-A750WB Manual page 35

9.9. Convection Element And Circulation Fan Motor
1. Remove the four screws A holding the rear heater cover.
2. Remove the wire terminals from the thermal cutout, circulation
fan motor and the convection elements.
3. After removing the rear heater cover, remove the three screws B
holding the inner heater cover.
4. Un clip the metal tags to remove the inner heater cover.
5. Remove the two screws C holding the convection assembly, push
upwards to remove.
6. To remove the convection element remove the one screw E on the
convection bracket A and 2 screws D on convection bracket B
7. Release the circulation fan nut to remove the circulation fan blade.
One screw to remove the grill bracket
Figure 12
Removing the grill element
35