Panasonic INVERTER NN-A750WB Manual page 34

by the arrows.
2. Disconnect the two lead wires connected to the turntable motor
3. Remove the turntable motor by removing the two screws
Note: After breaking off the motor cover, make sure that cut-off portions are properly trimmed
off or bent inside so that no sharp edges are exposed.
Note: To secure the motor cover use a 4 x 6 screw.
9.8. Quartz Heater
1. Disconnect the lead wires from the heater terminals
2. Remove one screw holding the heater supports
3. Remove the heater
Figure 9
Removing the turntable motor cover
Figure 10
Two screws to remove the turntable motor
Figure 11
34