Canon PowerShot G6 User Manual page 187

Attach the hood by aligning the.
mark on the rear of the hood with
the • mark on the adapter and
rotating the hood until the hoodfs
• mark aligns with the adapterfs
Y
mark.
• To remove the lens hood and adapter,
hold down the ring release button and
turn the adapter in the opposite direction
shown .
• • • • • • • G l I I l l l f l l l . { \ l s . . . « I . e
• • • If you use the built-in flash when the lens hood is attached, a
. . . portion of the flash will be blocked by the lens hood and appears
dark.
• If you use the viewfinder when the lens hood is attached, a
portion of the view will be blocked by the lens hood.
0 . 5 $ $ • • 0 • • 0 • • @1I041l4'l0
~
• When you are not using the lens hood, it can be stowed as
L..iJ
shown in the illustration below.
179