Canon PowerShot G6 User Manual page 145

Index Playback
• Press the
~
button to switch to index
playback (3 images).
• Select an image using the main dial or
the
~
or
~
arrow on the omni selector
and mark or remove marks from images
using the .... or T arrow on the omni
selector.
• The selection number and a check mark
appears at the bottom of selected
images.
• After you press the SET button, you can
select all the images by selecting [Mark
all] using .... or
T
on the omni selector
and pressing the SET button again. (Y9u
can deselect all the images by selecting
[Clear all].)
• You can select images using the main
dial or the
~
or
~
arrow on the omni
selector and change the settings using
the .... or T arrow on the omni selector
after [Mark all] or [Clear all] has been
selected.
5
Press the MENU button.
• The image selection screen will close.
•
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and
have
the show repeat itself continuously.
Sets the duration that each image in a slide show is displayed.
Play Time The options are anyone of 3 - 10 seconds, 15 seconds, 30
seconds and Manual.
Repeat Sets whether the slide show stops when all the slides have
been displayed or continues to display until stopped.
Display the slide show menu.
137