Switching between Flash Adjustment Settings (continued)
Press the DISPLAY button to turn the LCD monitor
on.
Press the FUNC. button, then select
or ... arrow on the omni selector.
using the"
Adjust the compensation using the main dial or the
..... or
~
arrow on the omni selector.
• You can shoot the image right after selecting settings by pressing
the shutter button. The menu displays again after the shot,
allowing you to change the settings easily.
e.g. [Flash Adjust] set to [Auto]
e.g. M mode or [Flash Adjust]
set to [Manual]
Press the FUNC. button or click the main dial.
• To cancel the compensation, return the setting to
(!J.
110