Display - Pioneer VSX-821-K Operating Instructions Manual

Controls and displays
11
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 20).
12
AUDIO/VIDEO input terminal
See Connecting to the front panel video terminal on page 18.
13
iPod iPhone iPad/USB terminal
Use to connect your Apple iPod or USB mass storage device as an
audio source (page 18).
14
iPod iPhone iPad DIRECT CONTROL
Change the receiver's input to the iPod and enable iPod
operations on the iPod (page 24).

Display

15
PHASE
Lights when the Phase Control is switched on (page 30).
16
AUTO
Lights when the Auto Surround feature is switched on (page 28).
17
Tuner indicators
ST – Lights when a stereo FM broadcast is being received in
auto stereo mode (page 27).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is registered or
called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing the
currently received AM/FM broadcast frequency.
18
Speaker indicators
Indicates the speaker terminal, A and/or B, to which audio signal
output is currently set (page 12).
19
Sleep timer indicator
Lights when the receiver is in sleep mode (page 8).
20
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type, etc.
21
Character display
Displays various system information.
22
DTS indicators
DTS – Lights when a source with DTS encoded audio signals
is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
ES – Lights to indicate DTS-ES decoding.
96/24 – Lights when a source with DTS 96/24 encoded audio
signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is on,
this lights to indicate NEO:6 processing (page 28).
23
Dolby Digital indicators
2D – Lights when a Dolby Digital encoded signal is detected.
2D+ – Lights when a source with Dolby Digital Plus encoded
audio signals is detected.
2HD – Lights when a source with Dolby TrueHD encoded
audio signals is detected.
EX – Lights to indicate Dolby Digital EX decoding.
2PLII(x) – Lights to indicate 2 Pro Logic II/2 Pro Logic IIx
decoding. Light will go off during 2 Pro Logic IIz decoding
(see Listening in surround sound on page 28 for more on this).
24
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see Using the Advanced surround on page 29 for more on
this).
25
SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and selected
audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks when
an HDMI signal is selected and selected HDMI input is not
provided.
26
Up Mix/DIMMER indicator
Lights when the Up Mix function is set to ON (page 30). Also, lights
when DIMMER is set to off.
27
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched on
(page 29).
01
01
7
En