Choosing Recovery Discs; Creating Recovery Discs; Using, Updating, And Maintaining Your Pc (Windows 7 Systems) - HP Compaq 6000 Pro All-in-One Getting Started Manual

Choosing Recovery Discs

●
To create recovery discs, your computer must have a DVD writer, and you must use only high-
quality blank DVD+R or DVD-R discs.
NOTE:
or DVD-R DL discs to create recovery discs.
●
Use high-quality discs to create your set of recovery discs. It is normal for discs to be rejected if
they are not defect-free. You will be prompted to insert a new blank disc to try again.
●
The number of discs in the recovery-disc set depends on your computer model (typically 3–6
DVD discs). The Recovery Disc Creator program tells you the specific number of blank discs
needed to make the set.
NOTE:
written on the disc is correct. You can quit the process at any time. The next time you run the
program, it resumes where it left off.

Creating Recovery Discs

To create recovery discs:
1. Close all open programs.
2. Click the Start button, click All Programs, click Recovery Manager, and then click Recovery
Disc Creation. If prompted, click Yes to allow the program to continue.
3. Follow the onscreen instructions. Label each disc as you make it (for example, Recovery 1,
Recovery 2).
Using, Updating, and Maintaining Your PC (Windows 7
Systems)
Systems with Windows 7 provide a centralized location to easily manage your PC, including the
following:
●
View or change your computer name and other system settings
● Add a device or printer and change other system settings
●
Get help and support for your specific model
●
Install HP support software for your computer
●
Purchase supplies and accessories for your computer
To access the centralized PC management location, click Start > Devices and Printers then double-
click on the picture of your PC.
12 Getting Started
You cannot use CDs or DVD+RW, DVD-RW, DVD+RW DL, DVD-RW DL, DVD+R DL,
The process of creating recovery discs takes some time to verify that the information
ENWW