Philips OneBlade QP2620 Manual page 22

22
English
Warranty and support
Guarantee restrictions
Troubleshooting
Problem
The appliance
does not charge
when it is
connected to the
mains.
I cannot switch
on the appliance
when it is
connected to the
mains.
6 Lift the battery out of the inner body with the
screwdriver. The battery is connected with
double-sided tape.
Warning: Be careful, the battery strips are
very sharp.
If you need information or support, please visit
www.philips.com/support or read the
international warranty leaflet.
The blade is not covered by the terms of the
international guarantee because it is subject to
wear.
This chapter summarizes the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible cause
The appliance has
to be switched off
when you charge it.
You cannot use the
appliance when it
is charging. You can
only use the
appliance without
cord.
Solution
Switch off the appliance.
Disconnect the appliance
from the mains before use.