Philips OneBlade QP2620 Manual page 17

Cleaning and maintenance
- Regularly remove cut hair from the guard. If a
lot of hair has accumulated in the guard,
remove it from the appliance and blow
and/or shake out the hairs.
4 Switch off and clean the appliance after each
use.
5 To remove the comb, hold it on both sides and
pull it off the blade.
Clean the appliance after every use.
Caution: Never use compressed air, scouring
pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the
appliance.
Caution: Do not tap the appliance against a
surface to remove water from it, as this may
cause damage. Replace the blade if it is
damaged.
Cleaning the appliance
1 Remove the comb from the blade. Always turn
the appliance off before putting on or taking off
combs.
17
English