Initializing Further Smart Cards; Changing A Smart Card's Pin - HP Brio BA200 User Manual

NOTE

Initializing Further Smart Cards

You can initialize as many cards as you want. Each authorized user can
have their own smart card with user name and PIN.
Two blank uninitialized smart cards are provided with ProtectTools
2000. HP recommends that you use the second card to create an exact
duplicate of the first (by initializing it in exactly the same way). The
duplicate card can then be stored in a safe place and used if the original
card is lost or stolen.
Once you have initialized the first smart card, you can initialize further
cards at any time. To do this:
1 Log on to your PC using your smart card.
2 Run the Smart Card Security Manager.
For Windows NT and Windows 2000, click the
•
click the
Options...
change the
On Card Removal
For Windows 95 and 98, click the
•
Launch screen saver on smart card removal
.
Continue
3 Insert an uninitialized smart card into the reader.
4 Click the
Initialize
5 Follow the instructions to initialize the card.
6 Restore to their original state any settings changed earlier.
Store any duplicate smart cards in a safe place.

Changing a Smart Card's PIN

You can change a smart card's logon PIN (Personal Identification
Number). The PIN must be eight characters long and can contain any
alphanumeric characters (a-z, A-Z, 0-9). To change the PIN:
1 Run the Smart Card Security Manager and click the
2 Click the
Change PIN
3 Enter the old PIN, then the desired PIN (twice) and click
4 Managing Security and Smart Cards
button. Click the
setting to
Win 95/98
button.
button.
Managing Smart Cards
tab, then
Win NT
tab then
Policies
.
Continue
tab, then disable
setting to
Smart Card
.
OK
tab.
63