Windows 95
Windows 98
NOTE
Windows NT 4.0
Windows 2000
Initializing a Smart Card
1 If you have just installed the software and the PC has restarted, you
will be asked to insert a smart card in the reader.
2 Insert an uninitialized smart card in the reader with the gold chip
facing up.
3 Enter the cardholder's name and a PIN (personal identification
number). The PIN must be eight characters long and can contain
both numbers and letters. You must enter the PIN twice for
verification, then click on OK.
You must carefully memorize your PIN. You will not be able to gain
access to your PC with your smart card without the PIN.
4 Enter the cardholder's logon name, password, followed by the PIN.
Click on OK.
The smart card is now ready for use. To initialize further smart cards,
refer to "Initializing Further Smart Cards" on page 63.
3 Setting up HP ProtectTools 2000
Initializing a Smart Card
37