Table of Contents
Advertisement
Standard Repair Process Detail Technical Manual
LCD TV
1. Case
■ LCD module change
■ T-Con board change
2. Equipment
■ Service Remote controller
3. Adjust sequence
■ Press the 'adj' key
■ select V-COM
■ As pushing the right or the left button on the remote controller, And find the V-COM value Which is no or
minimized the Flicker.
(If there is no flicker at default value, Press the exit key and finish the VCOM adjustment.)
■ Push the OK key to store the value. Then the message "Saving OK" is pop.
■ Press the exit key to finish V-COM adjustment.
Copyright ⓒ 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Error
D. VCOM Adjustment
symptom
Content
Sequence of the Vcom adjustment
Established
date
Revised
date
A28
2010. 2 .19
A28
LGE Internal Use Only
Advertisement
Table of Contents
