System Board Configuration Jumpers - HP Brio 8300 Online Manual

•
Six expansion card slots for the installation of:
Two 32-bit
or
Three 32-bit PCI cards, two 16-bit ISA cards and one AGP card.
Note

System Board Configuration Jumpers

Clear CMOS The CMOS
Jumper (J22) computer. A jumper placed on pins 1-2 prevents change to the CMOS configuration. This is the default setting. Refer to
"Clearing the CMOS Configuration" on page 33
Microprocessor This jumper allows the system board to match the speed of the installed processor. You only need to change the
Configuration Jumper microprocessor configuration jumper if you install a new processor with a different speed to the one that is currently
(J23)
installed. Refer to
the jumper settings.
PCI cards, three 16-bit
PCI expansion card slots are generally white plastic grooves.
ISA expansion card slots are generally black plastic grooves lined with silver.
memory stores information, such as your computer's configuration, which is preserved when you turn off your
"Upgrading a Processor" on page 46
ISA cards and one AGP card,
for information about clearing the CMOS and using this jumper.
for information about installing a processor upgrade and changing
1 About Your Hardware
Main Components and Features of the System Board
13