0301H - 03Ffh: Floppy Disk Error Codes - HP Brio 7100 User Manual

Code
02F5H Number of blocks error.
02FFh Disk data read/write error.
0301h – 03FFh: Floppy Disk Error Codes
Code
0301h Undefined or invalid command in
sequential test.
0302h Address mark not found in sequential
test.
0303h Disk is write-protected.
0304h Requested sector not found in sequential
test.
0305h Reset failed in sequential test.
Explanation
Explanation
0301h – 03FFh: Floppy Disk Error Codes
Details/Parts to Check
Format, or re-format, the partition.
If error persists, install new hard disk drive.
Hard disk or hard disk controller error.
Check your hard disk drive is installed correctly.
Install new hard disk drive.
If error persists, install new system board.
Details/Parts to Check
Floppy disk drive or floppy disk controller error.
Check your floppy disk drive is installed correctly.
Install new floppy disk drive.
If error persists install new system board.
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Diskette error.
Remove write protection from diskette.
If error persists, replace diskette.
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Floppy disk controller error.
Check your floppy disk drive is installed correctly.
If error persists, install new system board.
Appendix A The Error Codes
English 57