HP Brio 7100 User Manual page 58

Appendix A The Error Codes
0001h – 00CCh: System Error Codes
Code
002Dh NDP stack pop error.
002Eh – NDP Tag word read or write error.
002Fh
0030h Read/Write test on DMA controller 1
failed.
0031h Read/Write test on DMA controller 2
failed.
0032h Read/Write test on page registers failed.
0040h Read/Write test on PIC ports failed.
0041h Stray or unrecognized interrupts
detected.
0050h The Timer Periodic Interrupt is not being
generated.
0051h The Timer is counting at a slower rate.
0052h The Timer is counting at a faster rate.
0060h The Real Time Clock Periodic Interrupt is
not being generated.
0061h The Real Time Clock is running at a
slower rate.
46
Explanation
English
Details/Parts to Check
Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
Processor error.
Check that the processor is correctly installed.
If the error persists, install new processor.
Direct Memory Access (DMA) controller error.
Install new system board.
Direct Memory Access (DMA) controller error.
Install new system board.
Direct Memory Access (DMA) controller error.
Install new system board.
Primary Interrupt Controller (PIC) error.
Install new system board.
Primary Interrupt Controller (PIC) error.
Install new system board.
Real Time Clock (RTC) error.
Install new system board.
Real Time Clock (RTC) error.
Install new system board.
Real Time Clock (RTC) error.
Install new system board.
Real Time Clock (RTC) error.
Install new system board.
Real Time Clock (RTC) error.
Install new system board.