JVC DLA-G150CLU Operating Instructions Manual page 62

Menu Transition Diagram in PC Menu Mode
Main menu in PC Menu Mode
Press 5/∞ to select an item.
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
Menu
3 or
Image adj.
Contrast
Set up Image adj.
Brightness
ENTER
Sharpness
Color temp. Contrast 12
All reset
Options
Brightness 12
EXIT
Language
Sharpness 1
Information
All reset ENTER
5
5 ∞
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
Menu
Set up 1
Image adj.
3 or
Tracking
Set up Tracking 123
Phase ENTER
Color temp.
Phase 12
Position
Options
Position ENTER
Resize
Language EXIT
Resize 1:1
Clamp
Information
Clamp
ST
5 ∞
Set up 1
Position ENTER
Resize 1:1
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
Menu
Color temp.
Image adj.
3 or
Set up Color temp. Color temp. Low
ENTER
RED
Color temp. RED 123
Options GREEN
GREEN 123
BLUE
Language EXIT BLUE
123
Information All reset
All reset ENTER
Press 5/∞ to select an item.
∞
5
Press 2/3 to set or adjust the value.
Menu
Options
3 or
Image adj. Menu display Menu display
Line display
ENTER
Set up Line display
Lamp time display
Color temp.
Keystone Lamp time display
Lamp control
Options
Keystone ENTER
EXIT
Language
Lamp control ENTER
Information
Page 2
ENTER
Press 5/∞ to
5 ∞
select an item. ENTER
Menu Language
∞
Image adj.
Set up
English English
Color temp. Deutsch Deutsch
Options Español Español
Language Italiano
Italiano
Information Français Français
∞
5
Menu
Image adj.
PC 1
Input
Set up
Switcher CH.0
Color temp. Resolution NTSC
Options Frequency H 79.9 kHz
Frequency V 75 Hz
Language
Lamp time 123 h
Information
You can see the information.
Note
• The display languages of the menus are set to "English" when the projector is
bought. The display language can be selected from the following 6 languages:
" (Japanese)", "English (English)", "Deutsch (German)", "Español
(Spanish)", "Italiano (Italian)" and "Français (French)". (Refer to page 46.)
The language settings in the section are explained in "English".
All manuals and user guides at all-guides.com
Menu Operations
Submenus in PC Menu Mode
Press 2/3 to select Yes or No.
Then, press ENTER to execute.
Image adj.
EXIT
All reset?
ENTER
Yes No
2 3 4 5
Press ENTER to select an item.
Press 5/∞ / 2/3 to move the
video screen/menu position.
Position
ENTER
Disp.Posi. Menu
12,12 ENTER
EXIT
Panel Aspect
BP
Press 2/3 to select Yes or No.
Panel Aspect
Then, press ENTER to execute.
Color temp.
EXIT
Middle High All reset?
Yes No
ENTER
Keystone 0
ENTER
15sec ON
5sec OFF
ON OFF
EXIT
ENTER
Lamp control
Normal
LPC
LOC
Page 2
Flip H OFF ON
Flip V OFF ON
RS-232C [bps] 9600 19200
Sleep time [min] 15 30 60 OFF
Page 1 ENTER
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
41
Menu Operations
Quick Reference Guide for PC Menu Mode
Main Menu in PC Menu Mode (While receiving computer-related signals)
Image adj. → (Refer to page 49)
Contrast: Contrast of the picture image being projected can be adjusted. (–30 to +30, 0*)
Brightness: Brightness of the picture image being projected can be adjusted. (–30 to +30, 0*)
Sharpness: Adjust the outline of letters etc. (1 / 2 / 3 / 4 / 5, 3*)
All reset: Resets above items to the factory set values.
Yes / No
Set up
Tracking: The lateral size and display area of picture image can be adjusted. (–128 to +127)
→ (Refer to page 47)
Flickering or dim picture image can be adjusted. (0 to 31) → (Refer to page 47)
Phase:
Video screen position and menu position can be adjusted. → (Refer to page 51)
Position:
Disp. Posi. / Menu
Resize: The relationship between the number of pixels (resolution) and the screen can be
selected. → (Refer to page 53)
"1:1": Picture image is projected with its original size.
Panel: Picture image is enlarged to the full size.
Aspect*: Picture image is enlarged while maintaining the original aspect ratio.
Clamp: Selectable clamp position. Normally, set to "BP". ST / BP*
Color temp.
Color temp.: Adjustable color temperature, Low/Middle* /High.
Will be adjusted to correct reddish or blueish image.
RED: Adjusts the red level. (o to 255, the adjustable range varies depending on signals)
GREEN: Adjusts the green level. (o to 255, the adjustable range varies depending on signals)
BLUE: Adjusts the blue level. (o to 255, the adjustable range varies depending on signals)
All-reset: Reset above items to the factory set values.
Yes/No
Options → (Refer to page 54)
Options 1
Menu display: 15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
Line display: 5sec* (Line display such as "PC1" or "PC2" appears on top right of the screen for 5
seconds when the VIDEO or PC button is pressed.) / OFF (Line display does not
appear.)
Lamp time display:
ON*: Displays when the lamp use time reaches 1000 hours when set in the LPC or LOC mode.
Does not display when the lamp use time reaches 1000 hours when set in the LPC or LOC
OFF:
mode.
Keystone: Press ENTER to enter the Keystone submenu.
Keystone: Adjust to correct the trapezoidal distortion of the projected image.
(–80 to +128, 0*)
Lamp control:
Normal*: Used as a normal lamp.
LPC: Lamp brightness is aLutomatically controlled with time.
LOC: Lamp brightness is controlled in 7 levels (-6 to 0) irrespective of the time. This is set within
the menu.
Page 2: Press ENTER to enter the "Page 2" submenu.
Flip H: OFF* / ON (Select for upside-down hanging on the ceiling.)
Flip V: OFF* / ON (Select for upside-down hanging on the ceiling.)
RS-232C [bps]: Selectable baud rate (transmission speed). 9600 / 19200*
Sleep time [min]: Selectable sleep times. If no-signal condition continues for the
period of selected time (Unite: Minutes), the projector enters the
stand-by mode. 15 / 30 / 60 / OFF*
Page 1: Press ENTER to return to the "Page 1" submenu.
Language for on-screen display. → (Refer to page 46)
Language
Japanese / English* / German / Spanish / Italian / French
Information → (Refer to page 56)
Input: Shows the terminal name selected by the PC button. (PC1 or PC2)
Switcher: This display currently has no meaning. ("CH.0" is usually displayed to indicate that it is not being used.)
Shows the resolution of the input signal being received. (Horizontal × Vertical)
Resolution:
It may not be displayed correctly with some input signals.
Frequency H: Shows the horizontal frequency of the input signal being received. (
Frequency V: Shows the vertical frequency of the input signal being received. (
Lamp time: Accumulated used hours of the light-source lamp.
* : Factory set value.
42
kHz)
Hz)