Wi-Fi Protected Setup (Wps) - Epson ET-2850U User Manual

5. Do one of the following:
• Open the Epson Smart Panel app on your device and use the information on the LCD screen to
select your product. Skip to step 7.
• To connect without using the Epson Smart Panel app, press the left arrow button and go to the
next step.
6. Do one of the following:
• For iOS devices, select iOS and press the OK button. Scan the QR code with the camera app on
your device and follow the instructions on your device.
• For other types of devices, select Other OS Devices and press the OK button. Use your device to
select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password
shown.
7. Press the OK button to select Done on the LCD screen.
The blue
enabled on the product.
Note: If the
enabled. Repeat these steps to try again.
Parent topic:
Related references
Status Icon Information
Related tasks
Using the Epson Smart Panel Mobile App

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic:
Wi-Fi Direct icon is displayed on the LCD screen and indicates if Wi-Fi Direct is
Wi-Fi Direct icon is displayed on the LCD screen, Wi-Fi Direct mode is not
Wi-Fi Direct Mode Setup
Wi-Fi Networking
36