Table of Contents
Advertisement
Date and time
Set date and time. ([- -] shows no programme is set.)
[Date and time] - submenu screen
Date and time
2022/01/01
Set
Year
Month
Day
Hour
Minute
■
Set date and time
Select [Year / Month / Day / Hour / Minute].
Set the selected item.
Date and time
2022/01/01
Set
Year
Month
Day
Hour
Minute
Select [Set] and press <ENTER>.
Date and time
2022/02/06
2015/01/01
Set
Year
Month
Day
Hour
Minute
Note
●
If the present date and time are not set, the time
settings for [Set up timer], [Screensaver], etc. cannot
be made.
●
The present date and time setting is reset in the
following case.
When the main unit is left unattended for 7 days or
longer after the main unit is turned off with the <Main
power switch>, the power plug is removed, or power
failure has occurred, etc.
●
Date and time cannot be set when [Year / Month /
Day / Hour / Minute] are set to [- -].
50
English
SATURDAY 10:00
2022
1
1
10
0
SATURDAY 10:00
2022
1
1
10
0
SUNDAY 18:00
99:99
2022
2
5
18
0
Network settings
Set when networking with a computer.
[Network settings] submenu will be displayed.
Network settings
Network control
Display name
LAN setup
Network status
AMX D. D.
Reset
■
[Network control]
Set when controlling with the unit's LAN terminal.
[On]:
Controls via LAN using the LAN terminal of the
Display. The power indicator lights orange when
the power is turned off with the remote control
(standby).
[Off]:
Invalidates control with LAN terminal.
(In this case, the power consumption of Standby
condition (when the power is turned off with the
remote control) will be slightly reduced.)
Note
●
When using the LAN control function for "Using
Network Function" (see page 60 ‒ 70), set this
function to [On].
●
Even if the setting is set to [Off], the Web browser
control screens that do not control this unit
(display information [Status], detailed settings
[Detailed set up] and password change [Change
password]) operate.
■
[Display name]
The name of the Display that is shown on the network
can be changed.
■
[LAN setup]
Detailed network settings for the LAN established via
the LAN terminal of the Display can be configured.
Select [LAN setup] with
LAN setup
Save
DHCP
IP address
192.168.
Subnet mask
255.255.255.
Gateway
192.168.
Port
Off
EF2-00
Off
and press <ENTER>.
Off
0.
8
0
0.
1
1024
--:--:--:--:--:--
Advertisement
Table of Contents
