Jbt-9; Service Concepts; Pos Flash Concept; Fps-10 Flash Concept - Nokia RM-70 Service Manual

Nokia Customer Care

Service concepts

POS flash concept

Note: Do not connect an ACP-charger to the phone! This may damage the FEM module.

FPS-10 flash concept

Note: Do not connect an ACP-charger to the phone! This may damage the FEM module.
Page 4 –12
XRE-2
The bluetooth cable connects the bluetooth connector of the module
jig to the bluetooth test box JBT-9.
XRF-1
The RF cable is used to connect, for example, a module repair jig to
the RF measurement equipment.
SMA to N-Connector ca. 610mm.
Attenuation for:
• GSM850/900: 0.3+-0.1 dB
• GSM1800/1900: 0.5+-0.1 dB
• WLAN: 0.6+-0.1dB
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
Service Tools and Service Concepts
Bluetooth cable
RF cable
RM-70
Issue 1